The CRH450 equipment manufactured by Fma is mounted over a truck with a cable reel system with a capacity of 450 meters. This truck has a work station, with a rotating reel driven by a hydraulic motor, to deliver or collect the cable. At the rear it has a positioning arm for the cable. At the same time, the workstation can rotate in the horizontal plane as it is mounted on a turntable.
This model can have a second reel of 450 meters, located next to the truck cabin, in order to double the capacity of the original cable, becoming a CRH900 model. Between the two reels, there is an articulated crane, which is used to exchange the reels between the two stations or simply to raise and lower the reels onto the truck. The workstation has a cabin for an operator to handle the cable. However, the system has a remote control so that the operator can control the equipment.
The SCR300-SCB6000 manufactured by FMA is mounted over a truck platform with a cable reeler system with a capacity of 300 meters.
This truck has a work station, with a reel that rotates 90° to both sides, driven by a hydraulic motor, to deliver and collect cable. At the back it has a 6 meter arm that turns 75° to the right and left, this allows the operator to always control the cable unloading keeping it in the direction and flow towards the floor, making it coil neatly and also every time it is necessary to take out sections for repair it can be done without problems and in a mechanized way.
Likewise, it allows cable to be loaded from the floor safely, allowing the plug and cable to be mounted on the reel for winding, it also acts as a tensor and organizer.
The workstation has a cabin for an operator to handle the cable. However, the system has a remote control that makes it possible to control the equipment from outside the truck.
The function of this Cable Reeler makes it easy for miners to throw the cable from bench to bench, thanks to its heavy duty reinforced claw.